Video Resolutions
• 1600x1280 at distances up to 650 feet
• 1280x1024 at distances up to 1000 feet.

Extension distance
Up to 1000 feet using CATx (x=5, 5e, 6, 7).

Extension Technology
Differential analogue signalling for video signals.

Cable Equalisation
Finely adjustable cable equalisation amplifiers enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units.

Indicators
The remote and local units are fitted with two indicators:
• Red shows the presence of power into the module
• Green indicates the presence of a video input.

Audio
Transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played.

Connectors
1x blue 15-pin high-density D-type female connector for video input;
1x light green 3.5mm audio jack for audio input;
1x blue 15-pin high-density D-type female connector for video output;
1x light green 3.5mm audio jack for audio output or cascade to additional AdderLink AV 100T;
1x RJ45 connector for CAT-x cable connection.
1x 2.5mm DC jack for power adapter.

Physical
Metal case (steel and stainless steel), 3.858" x 3.74" x 0.984".

Power
• External 5V DC, 2A power supply with IEC power cable connection.
• Alternatively, 4 units can be powered using a 4amp power supply and the Adder "Squid" cable.
• Operating Voltage: 100-240VAC.
• Power Frequency: 50-60Hz.
• Power Usage: 5VDC at 500mA.
• Spike suppression: All AdderLink AV units are fitted with spike suppression circuits.

Display Data Channel
DDC signalling is supported to enable the computer to communicate with the local monitor and thus configure its video card for optimal operation.

Approvals
• FCC class A.
• CE marked.

Environment
• Temperature Tolerance: – 0-40°C (32 to 104°F).
• Humidity Tolerance: – 5 to 60% non-condensing.