Temperature
• Temperature Measurement Range: -40° to +167°F; -40° to +75°C
• Measurement Resolution: 0.2°F (0.1°C) increments
• Measurement Accuracy: Maximum ±0.6 at -40ºF, minimum ±0.6 at +25ºC and ±0.6 at +167ºF; Maximum ±0.3 at -40ºC, minimum ±0.3 at +25ºC and ±0.3 at +75ºC

LCD Display data
• Continuous embedded temperature display
• Display up to 8 sensors in stnadard rotation list, configured via SP+ web itnerface with preview
• Display sensor status, warning or critical
• Display sensor units: °C, °F, %rh, %, V, (m)A, (k)W, (k)Wh
• Displays unit's IP address when plugged in
• Displays swing handle lock status: open, closed
• Blue backlight

Operations
2x global status LED Indicators: warning and critical status
• Communications cable: RJ-45 jack to sensor port using UTP CAT-5e/6 cable
• Maximum Cable Length: 30 feet with approved low capacitance shielded or UTP CAT-5e/6 cable 

Power
• Source: Powered by the sensorProbe+ environmental monitoring appliance - no additional power needed
• Consumption: Typical 220 mWatt, 40 mA

Physical
• Dimensions: 169.67 x 97.1 x 31.18 mm
• LCD Dimensions: 88.95 x 53.42 mm
• Mounting: Keyhole

Notes
• Compatible with the sensorProbe+ platform units
• When plugging the first time or after upgrading a sensorProbe+ unit, the sensor firmware might be upgraded by the unit and not be available right away
• On the sensorProbeX+, the sensor firmware can be upgraded only on the main module sensor ports