RFID Swing-Handle Cabinet Lock Bundle - Model No. SHL01 - KVMGalore® | Tech Solutions Made Easy™
AKCP
  • MSRP $410.00
  • Savings$33.00
  • Our Price $377.00
FREE GROUND SHIPPING!
For additional views click on an image below
Image 1 of 6 view
Image 2 of 6 view

Image 3 of 6 view
Image 4 of 6 - A maximum of 12 swing-handle locks can be connected to a single SPX+ monitoring appliance. view

Image 5 of 6 - Each swing-handle lock comes with one security sensor for sensing the cabinet door position. Up to 4 security sensors per swing-handle can be added to monitor side panels and rear cabinet doors as well. view
Image 6 of 6 view

RFID Swing-Handle Cabinet Lock Bundle

Model No. SHL01 Ships within two weeks or less

Operations
• Supported Cards: EM-Card, 125Khz Proximity cards, 26bits K4100/EM4100/EM4200/T5577
• Proximity Reading Range: 0-3 cm
• Access Control: Up to 500 users
• Built-in RFID Antenna, Motor
• Fail-Secure: Integrated key lock for manual override
• LED Indicator: Lock status and access-control status
• Locking Control: Remote lock and unlock from the sensorProbe+ unit via Web interface, SNMP or AKCPro Server
• Calendar enabled locking and unlocking control
• Notification locking and unlocking control
• Sensor Count: 2

Environment
• Ambient Temperature: -25°C to 75°C
• Ambient Humidity: 10%-90%

Power
• Power source: Powered by the sensorProbe+ familiy units - No additional power needed
• Power Consumption: Typical 0.35 mWatt, 70 mA; Peak 1.75 mWatt, 350 mA
• Working Voltage: DC 5V

Physical
• Dimensions: 8.29 x 1.45 x 1.72 in. (210.6 x 37 x 43.8 mm)
• Communications Cable: RJ-45 jack to sensor using UTP CAT-5e/6 cable
• Maximum Cable Length Run: 49 feet (15 m) with approved low capacitance shielded cable or UTP

Notes
• sensorProbe+ units auto detects the presence of the RFID swing-handle cabinet lock sensor
• Up to 12 RFID swing-handle cabinet lock sensors per sensorProbe+ unit
• RFID swing-handle cabinet lock sensor is only compatible with the sensorProbe+ platform units
• When plugging the first time or after upgrading a sensorProbe+ unit, the sensor's firmware might be upgraded by the unit and not be available right away. Firmware updates can only be performed on the main sensor module (first 4 sensor ports)

 

Listed below are additional products to consider which are compatible with RFID Swing-Handle Cabinet Lock Bundle. These items may be required to complete your system.

Security Sensor, Aluminum, 15 Feet

1) Security Sensor, Aluminum, 15 Feet

    Model No. SS15-A

$68.99

MSRP: $75.00 - You save $6.01

AKCP
Security Sensor, Compact, 15 Feet

2) Security Sensor, Compact, 15 Feet

    Model No. SS15-C

$55.19

MSRP: $60.00 - You save $4.81

AKCP
Security Sensor, Recessed, 15 Feet

3) Security Sensor, Recessed, 15 Feet

    Model No. SS15-R

$55.19

MSRP: $60.00 - You save $4.81

AKCP
Security Sensor, Standard, 15 Feet

4) Security Sensor, Standard, 15 Feet

    Model No. SS15

$55.19

MSRP: $60.00 - You save $4.81

AKCP
Security Sensor, Standard, 60 Feet

5) Security Sensor, Standard, 60 Feet

    Model No. SS60

$119.59

MSRP: $130.00 - You save $10.41

AKCP
Security Sensor, Standard, 100 Feet

6) Security Sensor, Standard, 100 Feet

    Model No. SS100

$179.39

MSRP: $195.00 - You save $15.61

AKCP
Comparing