Operations
• Supported Card Reader: AKCP Keypad EM Reader; 3rd Party Readers: miFare, HID, EM Proximity with CardID wiegand output on 26bits, 30bits 32bits
• Supported Cards: AKCP EM Reader: EM-Card, 125Khz Proximity cards, 26bits K4100/EM4100/EM4200/T5577
• Proximity Reading Range: 0-5 cm
• Access Control: Up to 500 users
• Authentication: Card or Card+PinCode
• Built-in Motor
• Fail-Secure: Integrated key lock for manual override
• LED Indicator: Lock status and access-control status
• Locking Control: Remote lock and unlock from the sensorProbe+ unit via Web interface, SNMP or AKCPro Server
• Calendar enabled locking and unlocking control
• Notification locking and unlocking control
• Sensor Count: 2

Environment
• Ambient Temperature: -25°C to 75°C
• Ambient Humidity: 10%-90%

Power
• Power source: Powered by the sensorProbe+ familiy units - No additional power needed
• Power Consumption: Typical 800 mWatt, 160 mA; Peak 1.75 mWatt, 350 mA
• Working Voltage: DC 5V

Physical
• Dimensions: 8.29 x 1.45 x 1.72 in. (210.6 x 37 x 43.8 mm)
• Communications Cable: RJ-45 jack to sensor using UTP CAT-5e/6 cable
• Maximum Cable Length Run: 49 feet (15 m) with approved low capacitance shielded cable or UTP

Notes
• sensorProbe+ units auto detects the presence of the RFID swing-handle cabinet lock sensor
• Up to 12 RFID swing-handle cabinet lock sensors per sensorProbe+ unit
• RFID swing-handle cabinet lock sensor is only compatible with the sensorProbe+ platform units
• When plugging the first time or after upgrading a sensorProbe+ unit, the sensor's firmware might be upgraded by the unit and not be available right away. Firmware updates can only be performed on the main sensor module (first 4 sensor ports)