RWSC10: Rope water sensor for detecting water leaks over a large area 

with field-extension capability 

Combined with any of AKCP's environmental monitoring appliances, ropeWater sensor provides advance notice of any water leaks or flooding. The water detection can be used to trigger alerts like e-mail, SMS, phone calls and SNMP traps. The sensor has its own SNMP OID so that it can be monitored over the network using any Network Management System. The sensor also retains its error condition until it is read via an SNMP get. Therefore if the sensor encounters a critical condition at anytime it will report that condition before it returns to a normal state.

With ropeWater sensor you can protect your essential equipment from potentially harmful water damage. Designed and manufactured by AKCP it forms an integral part of your solution for data center monitoring.

Lay this rope water sensor out around the perimeter of your room, or underneath aisles in your data center to give early warning of potential water leaks and avoid costly damage.

Ideal for use in basements and under false floors and roof spaces, ropeWater sensor can cover a large area.

ropeWater sensor comes fully assembled and includes:
• Yellow water-sensing cable
• Orange non-sensing cable (from the rope to the sensing module)
• Main sensing module

IP66 rated waterproof connectors join the two sections of rope together.

The sensing cable can be pre-ordered from a 10 foot minimum to any custom length (in multiples of 10 feet) of up to 160 feet.
The non-sensing cable comes in a standard 20 foot run length.

ropeWater sensor comes complete with a 5 foot CAT-5 cable that connects the main sensing module to AKCP environment monitoring appliance RJ-45 sensor port. Users can replace this cable with their own CAT-5/6 cable as long as 100 feet in length.

Features and Benefits
• Ideal for covering large areas monitoring water leaks in warehouse and data centers
• Compatible with sensorProbe, sensorProbe+ and securityProbe series
• Protect water-sensitive equipment from disaster
• Notifications via E-mail, SNMP trap, SMS and more
• Sensing cable comes in extendable 10 foot lengths, or pre order custom length*
• Powered by sensorProbe+/securityProbe environmental monitoring appliance base unit, no additional power required
• Will report critical state if cable is cut or damaged

Package Includes
1x Interface box
1x 5 foot UTP CAT-5 cable with 2x RJ45 connectors (to connect inteface box to sensor port on AKCP environmental monitoring appliance unit)
1x 20 foot orange non-sensing cable
1x 10 foot yellow sensing cable with a female connector on the end to plugin an extension
4x Clips to attach the cable to the floor
• Comes fully assembled

* Customize the length of the yellow (sensing) cable in your system by purchasing Extra 1 Foot Yellow (Sensing) ropeWater Extendable Cable (see listing below) to the total desired length.

For example: if you need a 32 foot (total length) sensing cable, you must order:
1x of this RWSC10 10 Foot Rope Water Sensor, and
22x RWSC-001 Extra 1 Foot Yellow (Sensing) ropeWater Extendable Cable
You will receive 1x Rope Water Sensor system with a 32 foot long extendable sensing cable

Note: AKCP does not recommend ropeWater sensor to be placed on a conductive surface