HDMI over single CAT-5 receiver with dual display 

using HDBaseT up to 330 feet, supporting Ultra-HD/4K 

Note: Transmitter units are purchased separately

• Extends HDMI signals to one local and two remote displays up to 328 feet (100 m) over a single CAT-5e/6/6a or ATEN 2L-2910 CAT-6 cable
• HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant
• 4K up to 328 feet (100 m)
• 1080p up to 492 feet (150 m) when in HDBaseT Long Reach Mode
• Supports two IR channels for simultaneous IR signal transmissions

VE814A-ATA delivers high quality videos in dual displays over distance. With VE814A-ATA HDMI extender, your HDMI displays can be located up to 328 feet (100 m) away from the HDMI source device. This is made possible using only one CAT-5e/6 cable, which is cheap and easily available.

In addition, your video can be streamed using up to three HDMI displays – dual displays connected to the receiving unit (VE814AR-ATA) and another one to the transmitter unit (VE814AT-ATA).

ATEN VE814A-ATA is an HDBaseT video extender that is capable of sending HDMI signals up to 328 feet (100 m) over a single CAT-5e/6/6a or ATEN 2L-2910 CAT-6 cable. Featuring dual synchronous outputs, VE814A-ATA can transmit video signal to two remote displays and one at the local side.

This HDCP 2.2-compliant extender meets the HDMI specification, including 3D, Deep Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 328 feet (100 m).

VE814A-ATA supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE8014AT). In addition, it supports Long Reach Mode that extends 1080p HDMI signals up to 492 feet (150 m) via a single CAT-5e/6 cable.

VE814A-ATA is a powerful solution for where digital signage is required, such as bars, educational spaces, and public transportation stations, allowing display of identical contents at different spots.

Features and Benefits
• Supports two IR channels for simultaneous IR signal transmissions, ranged from 30 KHz to 56 KHz
• EDID – when both transmitter and receiver sides are connected, VE814A-ATA adopts the EDID values of the display connected to VE814AT for high-quality output
• RS-232 channel allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners
• Supports wide screen format
• Built-in 8 kV/15 kV ESD protection
• Plug-and-play
• Rack-mountable

Package Contents
1x VE814AR Receiver
1x RS-232 Terminal Block
1x Power Adapter
1x User Instructions