Video
• Input/Output  Interface: 1x HDMI Type A Female (Black)
• Impedance: 100 Ώ
• Max Distance: Up to 1.8 m
• Max. Data Rate: 6.75 Gbps (2.25 Gbps Per Lane)
• Max. Pixel Clock: 225 MHz
• Compliance: HDMI (3D, Deep Color); HDCP
• Max Resolutions: Up to 1080p @ 600m

Audio
• Input: 1x HDMI Type A Female (Black)
• Output :1x HDMI Type A Female (Black)

RS-232
• Connector: 1x Terminal Block, 3 pole
• Baud Rate: 19200
• Data Bits: 8
• Stop Bits:1
• Parity: No
• Flow Control: No

IR
• 1x Mini Stereo Jack Female (Black)
• 30~60 KHz full range transmission

Power
• Connector: 1 x DC Jack
• Consumption: 5.3 VDC, 5.6W

Environment
• Operating Temp.: 0-50°C
• Storage Temp.: -20 - 60°C
• Humidity: 0-80% RH, Non-Condensing

Physical
• Housing: Metal
• Weight (each unit): 0.9 lb (0.42 kg)
• Dimensions (L x W x H): 5.6 x 4.1 x 1.2 in (14.69 x 10.3 x 3cm)

Notes
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fi ber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. The VE882 supports OM3 optical fiber which can extend the transmission distance up to 300 meters.
3. The device supports full frequency IR signals from 30kHz to 60kHz. The IR receiver cable included with the package, however, only supports signals from 30kHz to 56 kHz.
4. It is recommended that you use a Single Mode fiber optic cable that conforms to IEC 60793-2-50 B1.1 or ITU-T G.652.B specifications.
5. No cables are included in this package. ATEN strongly recommends that you purchase high-quality cables of appropriate length since this will affect the quality of the audio and video display.