USB-VGA Cable KVM Switches

2- and 4-port USB-VGA KVM switches

with bonded KVM cables, audio support, USB peripheral sharing, remote push button switching, and 2078x1536 video resolution

ATEN's USB cable KVM switches are compact, multi-platform KVM switches which allow one keyboard, mouse, and monitor to control up to four USB computers.

CS22U has a remote selection switch, which is a unique feature that provides a simple method for switching computers. The remote assembly is designed to allow you to drop the KVM behind your desk keeping your desk top clear of extra hardware. The CS22U does NOT support audio.

CS62U and CS64U has audio connections that provide speaker and microphone sharing between the computers. The integrated cables keep the installation clean and simple. Switching computers is simply a matter of a few keystrokes, no need to remove your hand from the keyboard. Because the KVM intercepts switching commands directly from the keyboard, there is no software to install on your computers and it is compatible with virtually any operating system that is USB compliant.

For CS62U and CS64U, a unique feature is the USB controller built into the mouse port, which allows a powered USB hub to be connected for printer, scanner, hard drive, etc. sharing between the attached computers. Because the connection is a USB controller ATEN's USB Cable KVMs support the programmable buttons on high end mice. These Cable KVMs are also DDC2B compliant to ensure correct display resolutions (up to 2078 x 1536) are maintained when booting or switching computers.

CS64US features enhanced video DynaSync™ technology, which stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution.

ATEN's USB Cable KVMs are ready to go right out of the box, it's just a matter of connecting your mouse, monitor, and keyboard to the console side, then connecting the built in cables to your computers.

CS22U: 2-ports w/ remote push button switching

CS62U: 2-ports

CS64US: 4-ports w/ DynaSync