Copyright © 2024 KVMGalore® - All rights reserved.
4x1 4K 18G HDMI and HDBaseT switcher
with two mirrored outputs (local HDMI and HDMI over HDBaseT 131 foot extension), audio de-embed, IR, RS-232, IP control, PoH, CEC Manager™
Key Digital® KD-PS42 is a 4K/18G KD-App Ready presentation switcher kit with CEC Manager™, auto switching, and audio de-embedding creating a user-friendly, simplified presentation system.
KD-PS42 features three HDMI and one HDBaseT input which integrates natively with HDMI + DisplayPort wall plate, KD-X2x1WDTx (sold separately).
Mirrored HDMI and HDBaseT outputs enable audience + presenter views and the HDBaseT output marries in with the included KD-X40MRx for integrating monitors or projectors up to 131 feet away when the selected source is outputting 4K/UHD (up to 230 feet at 1080p).
Designed for professional audio video installations in conference rooms, board rooms, classrooms, lecture halls, auditoriums, and more, KD-PS42 enables multiple video sources to be displayed on up to two connected displays while analog (balanced/unbalanced) and digital (PCM) audio de-embed ports feed audio of the selected source into an amplifier, DSP, or sound bar.
Integrating KD-PS42 with KD-AMP220 will enable an app-ready all-in-one solution for control of video switching with sound and speech enforcement.
Key Digital CEC Manager™ enables basic controls of the connected displays for a simplistic all-in-one integration system.
KD-PS42 presentation switcher supports all SD, HD, VESA and Ultra HD/4K video standards with HDR header information included in a variety of 4K EDID handshakes.
In addition to IR, RS-232, and TCP/IP control, KD-PS42 can also be controlled via trigger voltage and features statusmonitoring LEDs.
Features and Benefits
• Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx wall plate HDBaseT transmitter for plug-in on walls, floor and table boxes
• Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto switching, or trigger control
• Ultra-HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
• CEC Manager™: Power, volume, and muting controls of the connected display/ projector without any additional control wiring. Selection of desired CEC command recipient
• Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors
• KD-AMP220 Control Mode: Command forward to KD-Amp220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
• HDCP Licensing: Fully licensed and compatible with HDCP 2.2
• HDR10: More life-like images through a greater range of luminance levels
• Power over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
• Installation: Half-rack width with rack mounting ears included
• 4K/Ultra-HD (18G) Signal Extension: Up to 40m /131 feet
• 1080p Signal Extension: Up to 70m / 230 feet
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
• Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage
• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
• RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
• Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1
• Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
• Control System Support: Fully controllable by all TCP/IP and RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
• KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager™
Included Accessories
1x Power Supply 48V/1.04A, 50W, desktop type, model KDPS50W48VC
1x Operation User Manual
1x Remote Control: KD-RMPS includes battery
2x Rack Ear Mount of PS42
4x Rack Ear Mount Screw of PS42
1x Half Rack Ear Mount of PS42
2x Table Top Ear Mount of PS42
4x Table Top Ear Mount screw of PS42
1x RX Extender (KD-X40MRX)
2x Wall Ear Mount of X40MRX
4x Wall Ear Mount screw of X40MRX
1x 6 Pos. Blue Color Terminal Block Plug (F73-5-30600060)
1x 6 Pos. Green Color Terminal Block Plug (F73-5-30600050)
2x 3 Pos. Green Color Terminal Block Plug (F73-5-30300050)
1x IR Emitter (3.5mm mono type)
1x IR Sensor (3.5mm stereo type)