Copyright © 2024 KVMGalore® - All rights reserved.
4K 18G HDBaseT receiver
(131 feet) with L/R audio de-embed, IR, RS-232
Note: Transmitter units are purchased separately
Key Digital® KD-X40MRx is a 4K/Ultra-HD, HDCP 2.2 compliant HDBaseT receiver with 18Gbps bandwidth for extension of digital video signals with the latest standards in resolution, HDR, and chroma.
KD-X40MRx is sold a la carte to natively integrate with Key Digital HDBaseT wall-plate transmitters, KD-X2x1WDTx or KD-X2x1WVTx. Other integration options are possible.
KD-X40MRx supports flexible PoH for powering of the wall plate transmitter, and audio de-embed output for ease of integrating the selected wall plate source with audio systems.
4K/Ultra-HD 18G signals are extended up to 131 feet (40 m) and 1080p up to 230 feet (70 m) via single CAT-5e/6 cable. In addition to AV signals, KD-X40MRx extends
IR and RS-232 for controlling remotely located equipment.
Features and Benefits
• Tx Options: Sold a-la-carte to integrate natively with KD-X2x1WDTx and KD-X2x1WVTx wall-plate transmitters (sold separately)
• Flexible Power over HDBaseT: Rx powers Tx when integrated with KD-X2x1WDTx / KD-X2x1WVTx. Rx is powered by Tx when integrated with KD-PS42 / KD-UPS42
• Audio De-embedding: Audio of the incoming source is de-embedded at the unit’s analog L/R audio connection for ease of integration with audio systems
• CEC Manager™: Passes through CEC control signals for monitors & projectors when integrated with KD-PS42 / KD-UPS42.
• Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Low Profile: Super slim chassis design
• 4K/Ultra-HD (18G) Signal Extension: Up to 40m / 131 feet
• 1080p Signal Extension: Up to 70m / 230 feet
• 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
• HDR10: More life-like images through a greater range of luminance levels
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• Deep Color Support: Up to Ultra-HD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
• IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
• RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Included Accessories
2x Mounting bracket
1x IR Sensor
1x IR Emitter
1x 3-pin phoenix terminal
1x Power Supply, 48V 0.41A, 20W, KDPS20W48VC