Local Unit
• Compatible with a USB computer with Ultra-HD DisplayPort output
• Multiplatform support: Windows 7/10/11, Linux, and Mac OS 10/11
• One female DisplayPort connector
• One female USB Type-B connector
• Two female 3.5mm stereo jacks for audio out and mic in
• 3-pin screw terminal for RS232
• Support full-duplex RS232 up to 115200 baud
• One female RJ45 port for sending/receiving video, audio, USB, and RS232 signals
• One simplex female LC fiber optic port for sending video, audio, USB, and RS232 signals
• DIP switch for specifying unit ID
• HDCP compliant

Remote Unit
• One female DisplayPort connector
• Four transparent female USB 2.0 Type-A connectors
• Supports high-speed (480 Mbps), full-speed (12 Mbps), or low-speed (1.5 Mbps) USB devices - keyboard, mouse, game controller, USB flash drive, touch screen monitor, whiteboard, etc.
• Two female 3.5mm stereo jacks for audio out and mic in
• 3-pin screw terminal for RS232
• Support full-duplex RS232 up to 115200 baud
• One female RJ45 port for sending/receiving video, audio, USB, and RS232 signals
• One simplex female LC fiber optic port for sending/receiving video, audio, USB, and RS232 signals
• DIP switch for specifying unit ID

Video Resolutions
• Ultra-HD 4Kx2K resolutions up to 3840x2160 @ 30Hz YUV 4:4:4
• HDTV resolutions up to 1080p @60Hz
• Up to 1920x1200 (WUXGA)
• Supports embedded digital audio through DisplayPort-compatible monitors or audio receivers
• HDCP compliant

Max Distance
• Using CAT-6/6a/7 cable: 4Kx2K signal up to 328 feet (100 meters); 1080p or 1920x1200 signal up to 492 feet (150 meters)
• Using singlemode 9-micron cable: 6.21 miles (10 km)
• Using multimode 50-micron cable (OM2 and above): 1,640 feet (500 meters)

Cables
• Interface cables between the source/display and the transmitter/receiver are required for proper operation
• Use DP-xx-MM to connect a DisplayPort source or display up to 15 feet (not included)
• Use DP8K-FO-xxM-MMLC or DP8K-FOCMP-xxM-MM active optical cable to connect a DisplayPort monitor up to 100 meters (not included)
• One 6 foot (1.85 m) male USB Type-A to male USB Type-B interface cable included
• Use CAT-6/6a/7 cable terminated with standard RJ45 connectors to extend the receiver from the transmitter (not included)
• Extend a 4Kx2K signal up to 328 feet (100 meters)
• Extend a 1080p or 1920x1200 signal up to 492 feet (150 meters)
• Use a simplex singlemode LC 9-micron fiber optic cable to extend the receiver from the transmitter up to 6.21 miles (10 km) Not included
• Use a simplex multimode LC 50-micron (OM2 and above) fiber optic cable to extend the receiver from the transmitter up to 1640 feet (500 m) Not included

Power - Local Unit
• Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (included)
• Output: 12VDC, 2A
• Power consumption: 3W

Power - Remote Unit
• Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (included)
• Output: 12VDC, 2A
• Power consumption: 15.6W
• The current passing through each USB port cannot exceed 0.5A

Environmental
• Operating temperature: 32 to 131°F (0 to 55°C)
• Storage temperature: -4 to 185°F (-20 to 85°C)
• Operating relative humidity: 5 to 90% non-condensing RH
• CE, FCC, RoHS
• TAA compliant

Dimensions
• W x D x H: 6.3 x 4.29 x 1.12 in. (160 x 109 x 29 mm)