SM-16X16-HD4K: Route Ultra-HD 4K 60Hz 4:4:4 18Gbps HDMI video and audio signals

from 16 video sources to 16 displays 

• Ultra-HD 4K @ 60Hz 4:4:4 video resolution
• 18Gbps bandwidth
• HDMI 2.0, HDCP 2.2
• Compact 1U case with fixed I/O
• IR, RS232, Ethernet control
• Control4^® certified

VEEMUX^® 4K HDMI matrix switch routes digital 4Kx2K HDMI video and embedded audio signals from up to sixteen HDMI video sources (computers, Blu-Ray players, satellite receivers, etc.) to up to sixteen displays (monitors, 4K TVs, projectors, etc.).

Features and Benefits
• Configure and control the switch through front panel buttons, Ethernet, IR remote control, or RS232
• Supports Ultra-HD 4Kx2K resolutions (3840x2160 and 4096x2160 @ 24/30/60Hz YUV 4:4:4) and HDTV 1080p
• Each input can be independently connected to any or all outputs
• HDCP 2.2 and 1.4 compliant
• EDID learning for the support of any HDMI display device
• Selectable built-in EDID table
• Compact 1RU design
• Cable management tray included

HDMI Features Supported
• HDMI 2.0
• Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS 7.1 and LPCM
• YUV 4:4:4, 4:2:2, and 4:2:0
• 12-bit Deep Color
• HDR
• 3D
• Bandwidth up to 600 Mhz (18 Gbps)

Control Methods

Front Panel Interface
• Standard control method
• Configuration and control can be done using the front panel buttons
• Keypad allows selection of the input source to be routed to the desired outputs

Ethernet Control
• Standard control method
• Configuration can be done over the Internet via Web server or Telnet
• Female RJ45 connector
• 10/100 BaseT Ethernet interface

Telnet
• Security is ensured by password
• Up to 25 users can access the telnet connection at one time
• Commands are similar to RS232 commands
• The telnet server listens on ports 2000 and 2005
• Port 2000 is for an operator telnet session
• Port 2005 is intended for a software control type session using raw TCP communication

Web Server
• Security is ensured by password and user configurable timeout
• Up to 25 users can access the web page at one time
The user can access the following pages:
• Switch page: allows the user to connect any input to any output, save and recall up to ten connections
• Administration pages: administrator can access pages for system configuration, network configuration, naming video inputs/outputs, scanning sequence, DDC options, changing password, and updating firmware
• Standby Mode page: allows the user to quickly place the switch in standby mode
• Support page: provides links to the product manual and firmware downloads web-page
• Reboot page: allows the user to quickly reboot the switch

RS232 Control
• Standard control method
• Configuration and control can be done through the serial port
• Female RJ45 connector
• Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232

Infrared Remote Control
• Standard control method
• Transmitter can be up to 30 feet (9.1 meters) away
• Control up to 15 switches with one remote
• Power: Two AAA batteries (included)

Package Includes
1x Matrix switch
1x Power cord- country specific
1x Remote control (IRT-UNV)
1x DB9 female-to-RJ45 female adapter (CT6182)
1x 5 foot CAT-5 patch cable (CB4352)
4x #10-32 x 3/4" pan head screws and #10-32 cage nuts (server cabinet mounting hardware)
36x zip ties
Cables are not included

Required Cables (per input/output port)
1x HDMI, male-male