1. Power Port (click thumbnail to blow-up corresponding legend image)
• 110 or 230 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)
• Power consumption: 35W
• Connection for Earth Ground.
• Fuse protection.

2. RJ45 Sensor Ports (click thumbnail to blow-up corresponding legend image)
• Sixteen RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.

3. Digital Inputs (click thumbnail to blow-up corresponding legend image)
• Eight screw terminals pairs for connecting dry contact devices.
• Input voltage: 0VDC to +25VDC.
• Provides +12VDC, 50 mA.
• Fuse protection.

4. Digital Outputs (click thumbnail to blow-up corresponding legend image)
• Four screw terminals pairs.
• Potential-free relay switch contacts.
• Normally open / normally closed connection points.
• Maximum switching load: 0.5A at 100VAC, 1A at 30VDC.

5. Beacon Port (click thumbnail to blow-up corresponding legend image)
• One screw terminal pair.
• Provides +12VDC, 180 mA to supply an alarm beacon.
• Fuse protection

6. Siren Port (click thumbnail to blow-up corresponding legend image)
• One screw terminal pair.
• Provides +12VDC, 180 mA to supply a siren.
• Fuse protection

7. AUX Power (click thumbnail to blow-up corresponding legend image)
• One screw terminal pair.
• Provides +12 VDC, 500 mA.

8. USB Device Ports (click thumbnail to blow-up corresponding legend image)
• Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
• Two USB ports on front panel and 2 on back panel.

9. USB Console Port (click thumbnail to blow-up corresponding legend image)
• One female USB Type B connector for connecting a PC for serial terminal access.

10. RS232 (DCS) Port (click thumbnail to blow-up corresponding legend image)
• One female RJ45 serial port for terminal access.

11. Ethernet Port (click thumbnail to blow-up corresponding legend image)
• One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.

Protocols
• HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0
• Compatible with any SNMP management software.
• Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.
• An IP address can be assigned to ENVIROMUX-16D automatically by a DHCP server.
• Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
• Alerts are posted in event log, which is accessible through Web user interface.
• Email alerts can be sent to 17 addresses.
• Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert.
• SNMP traps have unique OID's (Object Identifiers) for each sensor.
• OIDs for sensor and contact values for ENVIROMUX-16D.

Internal Temperature Sensor
• Applications from 32 to 104°F (0 to 40°C).
• Accurate to within ±1.35°F (±0.75°C).

Internal Humidity Sensor
• Applications from 20% to 80% relative humidity at temperatures between 32 to 104°F (0 to 40°C).
• Accurate to within ±5% relative humidity.

Internal Power Sensor
• Measures mains voltage: 0 to 255 VAC
• Measures battery voltage: 0 to 20 VDC
• Measures voltage on 24VDC models: 20 to 32VDC
• Measures voltage on 48VDC models: 36 to 72VDC
• Alerts are sent when there is a power outage and when power returns.

Back-up Battery
• Rechargeable sealed lead-acid battery.
• Battery removal/disposal instructions.
• Provides back-up for one hour.

Dimensions
• Without supplied rackmount kit : 16.19W x 10.01D x 1.75H
• With supplied rackmount kit: 19W x 10.01D x 1.75H

Environmental
• Operating temperature: 32 to 100°F (0 to 38°C).
• Storage temperature: -22 to 140°F (-30 to 60°C).
• Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals
• CE
• RoHS