RJ45 Sensor Ports
• Two female RJ45 jacks for connecting NTI temperature, humidity, liquid detection, smoke detection, glass break, vibration, motion sensors, and more
• Two levels of user-defined alerts – non-critical and critical
• Provides +12 VDC, 100 mA for each port

Dry Contact Closures
• Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor
• Potential-free
• Output voltage: +5 V DC
• Current limited to 10 mA
• Maximum resistance to close contact: 300K Ohm

Output Relay
• One screw terminal pair
• Potential-free relay switch contacts
• Normally open / normally closed connection points
• Maximum switching load: 0.5A at 125 VAC, 1A at 30VDC

USB Ports
• Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive
• One female USB Type B connector for connecting a PC for serial terminal access

Ethernet Port
• One female RJ45 connector
• 10/100 Base-T Ethernet interface

Power
• Provides +12 VDC, 500 mA
• 110 or 220 VAC at 50 or 60 Hz via AC adapter
• Power consumption: 5 W
• Power over Ethernet standards supported: IEEE 802.3af, 802.3at
• Proprietary schemes such as Cisco Discovery Protocol are not supported
• Similar legacy switches and routers will have to use PWR-SPLY-9V3A
• If the PoE source fails, the unit will automatically, without interruption, switch over to the DC power source

Protocols
• HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0
• Compatible with any SNMP management software
• Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB serial interface
• An IP address can be assigned to the ENVIROMUX-SEMS-2D automatically by a DHCP server
• Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem)
• Alerts are posted in event log, which is accessible through Web user interface
• Email alerts can be sent to 17 addresses

Dimensions
• 5.82W x 3D x 1.75H in.; 148 x 76 x 44 mm

Environmental
• Operating temperature: 32 to 100°F (0 to 38°C)
• Storage temperature: -22 to 140°F (-30 to 60°C)
• Operating /Storage Relative Humidity: 17 to 90% non-condensing RH

Regulatory Approvals
• CE
• RoHS
• EN51055
• EN50121-3-2