RJ45 Sensor Ports
• Five RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.
• Two levels of user-defined alerts – non-critical and critical.
• Provides +12 VDC, 100 mA for each port

Digital Inputs
• Five screw terminal pairs for connecting dry contact devices.
• Potential-free
• Input voltage: 0VDC to +25VDC
• Over-voltage surge protection
• Maximum resistance to close contact: 300K Ohm

Output Relays
• Four screw terminals pairs.
• Potential-free relay switch contacts.
• Normally open / normally closed connection points.
• Maximum switching load: 0.5A at 125VAC, 1A at 30VDC.

Alarm Port
• One screw terminal pair.
• Provides +12VDC, 180 mA to supply an alarm beacon or siren.
• Fuse protection

AUX Power
• One screw terminal pair.
• Provides +12 VDC, 500 mA.

USB Device Ports
• Four female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.

USB Console Port
• One female USB Type B connector for connecting a PC for serial terminal access.

Ethernet Port
• One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.

Power
• Dual AC power.
• If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the battery backup.
• 110 or 220 VAC at 50 or 60 Hz via AC adapter.
• Includes one country-specific AC adapter. The second AC adapter is sold separately.

Protocols
• HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0
• Compatible with any SNMP management software.
• Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface.
• An IP address can be assigned to the ENVIROMUX-5D automatically by a DHCP server.
• Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).
• Alerts are posted in event log, which is accessible through Web user interface.
• Email alerts can be sent to 17 addresses.
• Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert.
• SNMP traps have unique OID's (Object Identifiers) for each sensor.

Internal Temperature Sensor
• Applications from 32 to 104°F (0 to 40°C).
• Accurate to within ±1.35°F (±0.75°C).

Internal Humidity Sensor
• Applications from 20% to 80% relative humidity at temperatures between 32 to 104°F (0 to 40°C).
• Accurate to within ±5% relative humidity.

Back-up Battery
• Rechargeable sealed lithium battery.
• Provides back-up for two hours.

Dimensions
• 7.88W x 3D x 1.75H (in.); 200 x 76 x 44mm

Environmental
• Operating temperature: 32 to 100°F (0 to 38°C).
• Storage temperature: -22 to 140°F (-30 to 60°C).
• Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals
• CE
• RoHS