PWR-RMT-RBT-C13-D: Remote power reboot switch 

with IEC320 C13 outlet and 2 dry-contact inputs/outputs 

ENVIROMUX^® remote power reboot switch is used to remotely reboot and control power (on/off) to a server, router, web cam, firewall or other powered device over IP.

ENVIROMUX^® remote power reboot switch is the ideal solution for many applications, such as:
• Remote reboot of any device, router, server, kiosk, etc. The device need not be network attached
• Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from detecting them at all times
• Power down equipment when not needed for power savings and to save on wear and tear
• Power up alert devices (sirens or lamps) or environmental systems (heaters, coolers, pumps, etc.)

ENVIROMUX^® remote power reboot switch has two operating modes for power reboot:
• Manual – turn the power on/off/cycle
• Auto – scheduled, triggered, or configurable combination

Scheduled
Set date/time/duration of power cycle

Triggered
• Power on/off a device when a sensor connected to the dry-contact input changes state
• Reboot (power cycle) and control power (on/off) to unresponsive IP devices that are connected to the PWR-RMT-RBT-C13 power outlet

Features and Benefits
• Configure, control, and monitor the unit via the easy-to-use web interface or HTTP REST API – makes it easy to control power from anywhere in the world
• Two dry-contact inputs to monitor alarm contacts, environmental sensors, relays, and switch closures
• Shut down power when water or other environmental threats are detected
• Two dry-contact open collector outputs for control of external devices – drive relays for process control, security, and environmental controls
• Dry-contact outputs activate upon triggered event or via the user interface
• Monitor (ping) up to two IP network devices
• Unresponsive IP devices can be configured to trigger the outlet of PWR-RMT-RBT-C13 to power on/off/cycle
• Automatically configures network settings received from a connected DHCP server (if a DHCP server is not found, the default static IP address will be used)
• Dual password protection with separate user and administrator passwords
• Integrated mounting brackets for easy surface/wall mounting
• Cascade an unlimited number of PWR-RMT-RBT-C13 using the dry-contact I/O screw terminals
• Flash upgradeable
• Work with NTI "State-Reading" (dry-contact) sensors

Package Includes
1x NTI ENVIROMUX remote power reboot switch
1x DIN clip kit with hardware
1x 14 AWG 6 foot universal left-angled power cord, NEMA 5-15P to straight IEC 320 C13 (country-specific line cord if shipped internationally)
1x 5 foot CAT-5e Ethernet cable