RCT-MS1032Z: Mount equipment onto an IT rack fitted with threaded #10-32 mounting holes 

pack of 100 

• 100 screws in a pack
• Phillips truss-head
• Heat treated for strength and for head-stripping resistance
• Made in the USA

These rack-mounting screws are used for mounting equipment, shelves, and accessories onto IT racks with #10-32 threaded holes on their mounting rails.

Mounting rails with pre-tapped (threaded) round holes are common in relay racks, telco racks, wall-mount racks, patch-panel racks and communication-closets boxes and brackets.

The "10" refers to the drill size for a tapped (threaded) hole. #10-32 screw-type has 32 threads per inch, with an outside diameter of 0.19". #10-32 screw is smaller than a #12-24 screw.

Since the holes on the rack's mounting rails are typically pre-tapped – standard mounting screws typically work well with these rails. However, steel racks with pre-tapped rails may have their holes slightly clogged with paint (or powder-coat), making it more difficult to use standard mounting screws. Self-tapping screws typically overcome this hurdle for an easier installation.