Hosts
• Female 15-pin HD connectors.
• Supports USB computers with VGA video.
• Multiplatform support: Windows, Solaris, Linux, FreeBSD, and Mac OS 9/10.
• Any legacy PS/2 or Sun computer can be connected by using a USB-PS2-R or USB-SUN-R adapter.

Monitor
• Crisp and clear 1920x1200 resolution.
• Female 15-pin HD connectors.
• A multiscan VGA monitor is required to display the different video outputs from different platforms.
• Bandwidth is 150 MHz.

Devices
• Female USB Type A connectors.
• Compatible with most USB keyboards and mice, including Microsoft USB Intellimouse®, Logitech Cordless Elite Duo keyboard/mouse, Gyration keyboard/mouse, Crystal Vision keyboard with touchpad, and IKEY combo keyboard/touchpad.
• Keyboard and mouse are hot-pluggable.
• Female USB Type A connectors for additional USB 2.0 (low/full speed) devices.
• USB maximum data rate: 12 Mbps.

Power
• 110 or 220 VAC at 50 or 60 Hz via IEC connector.
• Power Consumption: 15 Watts

Keyboard Control
• Scan, Broadcast, Sharing or Command modes are available from the keyboard using hot keys.

RS232 Control
• Female RJ45 connector.
• Baud rate 1200 through 115200.
• Address up to 15 units, all of which can be daisy-chained and controlled by one serial port.

Ethernet Control
• Standard control method.
• Female RJ45 connector.
• 10/100 BaseT Ethernet interface.
• Supported protocol: Telnet.
• Control can be done over Telnet.

Telnet Control
• Commands are similar to RS232 commands.
• The telnet server listens on port 2005 (configurable).
• Port 2005 is intended for a software control type session.

Front Panel Interface
• Locally change ports and navigate through LCD screen to execute actions.
• LCD indicates currently selected port for each user.

On Screen Display (OSD)
• Select computers by name with the On Screen Display (OSD)
• Use keyboard or mouse to operate the switch from menus superimposed onto the monitor.
• Power status of each computer is displayed.
• View usage statistics – power-on cycles and hours of usage.
• Names can be up to 12 characters long.
• Shows names of computers on cascaded switches up to 256 ports.
• Modify the size and position of the OSD.
• Help screens assist users with the OSD.
• OS- and software-independent.
• OSD is built into the switch – no need to install additional hardware or software.

Security
• Advanced security included.
• Each user password can be up to 15 characters long, and each switch can store up to 63 users.
• Administrator can enable or disable all security features and select which computers each user can access.
• Once security is enabled, a user or administrator must login in order to access any of the computers connected to the switch.